Top Guided Single Seated Angle Control Valve-Products-KELK

Control Valve Ranges

Linear Control Valve Ranges

GLOBE VALVE

GATE VALVE

SELF-REGULATOR

OTHERS

Rotory Control Valve Ranges

Actuator Ranges

PNEUMATIC CYLINDER ACTUATOR

ELECTRO HYDRAULIC ACTUATOR

Control Accessories And Other

ELECTRO-PNEUMATIC POSITIONER

OTHER CONTROL ACCESSORIES

VALVE INNER PARTS AND WEARING PARTS

Special Valve Ranges

SPECIAL VALVE

Contact us

WUXI KELK APPARATUS &VALVE CO.,LTD
NO.6 DeYu Road,Hongshan Town,Wuxi,Jiangsu,China
Postcode： 214115

+86 (510) 85141699

+86 (510) 85141819

info@kelkflow.com.cn

QQ在线咨询（请点击）

Message

分享到：

GA110 Top Guided Single Seated Angle Control Valve

Applied with an unbalanced plug, GV110 top guided single seated angle control valve requires a large actuator output force. The size is reduced by incorporating a fine designed multi spring diaphragm actuator. This series is a good application for slurry polymer crystallization and high temperature fluid as the pressure balanced structure is not used here.

Performance Characteristics

1、Can be used for high pressure situation and capable of situation with slurry polymer crystals and high temperature fluid.
2、This valve is with advantages of simple structure, easy maintenance, which is a cost-effective control valve.
3、This series is limited for small valve size due to the unbalanced trim structure, and the maximum valve size should be within DN50.

Specifications

Body Size	1/2"(DN15)～2"(DN50)
Body Rating	ANSI Class 150#～2500#
Fluid Temp	-196～+550℃
Connections	Flanges(FF,RF,RJ,RTJ),Socket Weld, Butt Weld(SW,BW)
Body Materials	WCB,WC6,LCB,CF8,CF8M,etc.
Plug Materials	316,316+Stellite,316+RTFE etc.
Seat Leakage	ANSI Class IV(Cv×0.01%)
Rangeability	30:1～10:1
Flow Characteristics	Linear,Eq%

Product Advantage

1、Especially be suitable for controlling fluid with high viscosity, suspended solids and granules and being able to avoid coking, bonding, blocking.
2、The fluid flow can be side-in and bottom-out in case of high pressure. So the flow would go through the cage first and then to the valve plug and seat to avoid direct eroding the sealing surface of plug and seat, this helps to prolong the service life.

DownLoad

Back